Banzai 11 X Pro

A blend of light weight feel, power, control and range with some extra juice when you need it. A new profile combined with a more unified twist from bottom to top
creates a more efficient and lighter feeling sail giving you more range and control especially in down the line conditions.

Handling Characteristic: The lift is slightly higher up and further back compared to Banzai Surf Pro and Banzai Max Pro, which promotes a more upright feel but also
gives a touch of back hand pressure for more throttle when you need it. A direct but flexible feel keeps you connected at all times during maneuvers.

Lift: Up and slightly further back

Agility: All round jumping and wave riding

Feeling: Direct

Available in 3.2, 3.5, 3.7, 4.0, 4.2, 4.5, 4.7, 5.0, 5.3,
5.5, 5.7, 6.0, 6.3 square meters.

IWT and PWA World Cup Approved.

Pro Carbon Construction, Bi-Ply window, Warp Carbon panels.

Available in Fluo Yellow with Fluo Orange logos.

Every body panel features warp carbon.

Main window panel: 6 mil Bi-PLY from Dimension Polyant features two 3 mil layers of PET film. This creates a
softer hand, improved flex and reduced creasing. The UV inhibitors in the adhesive significantly increases the life of the product in comparison to traditional monofilm.

Upper window panels: 4 mil high quality Monofilm from Dimension Polyant.

Upper color body panels: 1.5 mil Ultra low stretch linear Warp Carbon fiber laminate yarns arrayed to
control load lines in the sail combined with super strong Technora aramid x-ply. Warp Carbon gives incredible linear control of the sail profile while also allowing a
dynamic, torsional, bias stretch and return. This makes the sails feel very quiet, weightless and very resistant to being overpowered.

Foot, tack and center luff panel: 2 mil Warp Carbon film combined with super strong Technora aramid x-ply yarns for increased puncture resistance. Warp Carbon
is extremely strong and stretch resistant, allowing the sail to hold it’s designed shape for a long long time.

Using 2 pass lamination for super strength and uniform UV resistance preventing sunlight from passing through so one side is always in the shade. The 2.0 mil foot
Warp Carbon has double the carbon frequency as the 1.5 mil body Warp Carbon.

Double stitching around the main window.

Dacron Leech edge reinforcement.

Folded rear edge on mast sleeve to prevent fraying.